If you find the steam nozzle has become blocked and won’t release steam, take a fine needle and insert it carefully into the two small holes at the end of the nozzle. We recommend doing this when the Bellman is not under pressure and is not on a heat source.
The nozzle can be blocked with milk if the nozzle is not purged after use. We recommend thoroughly wiping milk residue from the steaming wand after every use. Then open the steam valve briefly to allow the steam to purge any milk which has flowed up inside the nozzle. Once you are done with the Bellman, place it on your sink and open the steam valve, allowing all of the pressure to be released.